Installing A Memory Card; Turning The Camera On And Off; Formatting A Memory Card - LEXIBOOK DJ052 Serie Manual De Instrucciones

WARNING: Danger of explosion if battery is incorrectly replaced. Replace with same or
equivalent type recommended by the manufacturer. Discard used batteries according to the
manufacturer`s instructions or locals laws.
on one
You need to insert an SD card (8GB maximum, not included) so you can store your files.
1. Turn off the camera and open the battery/SD memory card door (20).
battery.
2. Push the SD card firmly into the SD slot until you hear a 'click' sound. Turn the camera
Note:
puter
• To remove the card, push it in slightly to release it from the slot.
• Always turn the camera off when you insert or remove an SD card.
ge
• We recommend that you purchase a good quality SD card.
camera
Press and hold the ON/OFF button (5) to turn the camera on. When you turn the camera
on, the blue Busy LED indicator (9) illuminates and the LCD screen lights up to confirm the
camera is ready for use. Press the ON/OFF button (5) once more to turn the camera off.
Note: The camera will auto power off after a period of inactivity to save battery power.
Press the ON/OFF button (5) to reactivate the camera. You can change the power-off time
by setting the function [Auto Off] in the 'Settings Menu (Capture Mode) > Setup' section
on page 26.
If the card is new or was previously formatted by another camera, format the card so that
the file format is compatible with your camera.
Caution: Formatting will delete all stored photos and videos even if they have been
protected. Download important files to your computer before formatting.
DJ052seriesIM1242_15Jun_V09.indb 25

INSTALLING A MEMORY CARD

on and should be visible in the bottom right of the LED screen. If no SD card has
been inserted, you will not be able to store your pictures.

TURNING THE CAMERA ON AND OFF

FORMATTING A MEMORY CARD

25
15/06/2012 11:03 AM