Tabla de contenido
Publicidad
3.1.1 Intended use
This machine was designed
and manufactured for:
– delimbing trees with dimensions suitable
for the length of the guide bar or wooden
objects with the same characteristics;
– used by one operator.
3.1.2 Improper use
Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm
persons and/or damage things. Examples of
improper use may include, but are not limited to:
– trimming hedges;
– carving operations;
– sectioning pallets, crates and
various packing materials;
– sectioning furniture or other materials with
nails, screws or other metal components;
– butchering meat;
– using the machine to cut materials other than
wood (plastic materials, building materials);
– using the machine to lift,
move or split objects;
– using the machine while
fastened to fixed supports;
– using cutting means other than those
found in the "Technical Data" table.
Serious injury and wound hazard.
– using of the machine by more
than one person.
IMPORTANT Improper use of the machine
will invalidate the warranty, relieve the
Manufacturer from all liability, and the user
will consequently be liable for all and any
damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by
consumers, i.e. non-professional operators.
It is intended for "DIY" use only.
3.2 MAIN COMPONENTS (fig. 1)
A. Motor: supplies the drive power
to the cutting means.
B. Control Rod: hand grip fitted with
the main throttle controls.
C. Rear hand grip: support hand grip
located on the rear of the control rod.
D. Front hand grip: support hand
grip located on the control rod.
E. Pruner: device used for trimming
and pruning trees.
F.
Harness: a fabric belt which, placed
over the shoulders, helps support the
weight of the machine during work.
G. Guide bar: supports and
guides the toothed chain.
H. Toothed chain: cutting element,
consisting of drive links fitted with
small blades called "teeth" and side
connections held in place by rivets.
I.
Chain restraint element: safety device
that prevents uncontrolled movements of the
toothed chain should it break or slacken.
J.
Bar cover guard: chainsaw cover on the
guide bar to be fitted during handling,
transportation or storage of the machine.
K. Battery: (if non provided with the machine,
see chap. 13 "accessories upon request")
device that supplies electric current to the
tool; its specifications and regulations for
use are described in a specific manual.
L. Battery charger (if non provided with the
machine, see chap. 13 "accessories upon
request"): device used to recharge the
battery; its specifications and directions for
use are described in a specific manual.
3.3 IDENTIFICATION LABEL (fig. 1)
The identification label holds the following data:
1. Sound power level
2. Conformity marking
3. Month/Year of manufacture
4. Type of machine
5. Serial number
6. Name and address of Manufacturer
7. Article code
8. Voltage and Frequency of power supply
9. Blade speed
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever
you contact an authorised service centre.
IMPORTANT The example of the
Declaration of Conformity is provided
on the last pages of the manual.
3.4 SAFETY SIGNS (fig. 2)
The machine has various symbols on it.
Meaning of symbols:
EN - 6
Publicidad
Tabla de contenido
