Pp Black 1-15/16" Flat Head Screw - Sauder 412301 Instrucciones De Montaje

4 4
These edges
should be even.
Carefully turn the ENDS (A and B) over.
Turn four BLACK 9/16" FLAT HEAD SCREWS (WW) into the ENDS (A and B) until the shoulder of the SCREWS rest on the
surface of the ENDS.
Slide the END MOLDINGS (M) onto the ENDS (A and B). Line up the groove in the MOLDINGS over the head of the SCREWS in
the ENDS.
Page 8
Apply pressure with your hands as
you guide the MOLDINGS over
the SCREWS and onto the ENDS.
B
M
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
www.sauder.com/services
These edges
should be even.
A
WW
M
Shoulder
412301