Functional Description; Intended Use; Product Features; Technical Data - Bosch GSH 11 E Professional Manual Original

Ofrecido por www.electromanuales.com
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for chiselling work in
concrete, brick, masonry and asphalt as well as
for driving in and compacting, when using the
respective accessories.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjustment ring (Vario-Lock)
4 On/Off switch
5 Thumbwheel for preselection of impact rate
6 Service indicator
7 Auxiliary handle (insulated gripping surface)
8 Knurled nut for auxiliary handle
9 Handle (insulated gripping surface)
Accessories shown or described are not part of the
standard delivery scope of the product. A comple.e
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
All manuals and user guides at all-guides.com

Technical Data

Demolition Hammer
Article number
Rated power input
Impact rate
Impact energy per
stroke
Chisel positions
Chiselling capacity in
concrete of medium
hardness
Tool holder
Lubrication
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
English | 15
GSH 11 E
Professional
0 611 316 7..
W 1500
-1
min 900 – 1890
J 6 – 25
12
kg/h 490
SDS-max
Central
permanent
lubrication
kg 10.1
/II
1 609 929 T27 | (23.11.09)