Safety Rules; Functional Description; Intended Use - Bosch GHG 660 LCD Professional Manual Original

All manuals and user guides at all-guides.com
OBJ_BUCH-485-001.book Page 14 Wednesday, January 23, 2008 12:48 PM
14 | English

Safety Rules

en
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Be careful when working with the power
tool. The power tool produces intense heat
which can lead to increased danger of fire and
explosion.
Exercise special care when working close to
inflammable materials. The hot air jet or the
hot nozzle can ignite dust or gases.
Do not operate or work with the power tool
in areas where there is danger of explosion.
Never direct the hot air jet at the same posi-
tion for longer periods. Easily inflammable
gases can develop e.g., when working plastic,
paint, varnish or similar materials.
Be aware that heat can be conducted to hid-
den covered materials and can ignite them.
After using, place the power tool down in a
secure manner and allow it to cool down
completely before packing it away. The hot
nozzle can cause damage.
Do not leave the switched-on power tool un-
attended.
Store idle power tools out of the reach of
children. Do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dan-
gerous in the hands of untrained users.
Connect machines that are used in the open
via a residual current device (RCD).
Do not expose the power tool to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan-
gled cords increase the risk of electric shock.
1 609 929 L85 | (23.1.08)
Always wear safety goggles. Safety goggles
will reduce the risk of injuries.
Disconnect the plug from the socket outlet
before making any adjustments, changing
accessories, or placing the power tool aside.
This safety measure prevents unintentional
starting of the power tool.
Check the power tool, cord and plug each
time before use. Do not use the power tool if
damage is determined. Do not open the pow-
er tool yourself and have it serviced only by
a qualified repair person using only original
spare parts. Damaged power tools, cords and
plugs increase the risk of electric shock.
Provide for good ventilation of
your working place. Gas and va-
pour developing during working
are often harmful to one's health.
Wear safety gloves and do not touch the hot
nozzle. Danger of burning.
Never direct the hot air jet against persons
or animals.
Do not use the power tool as a hairdryer. The
hot air being blown out is significantly hotter
than that from a hairdryer.

Functional Description

While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The power tool is intended for the forming and
welding of plastic, removal of paint and the
warming of heat-shrinkable tubing. It is also suit-
able for soldering and tinning, loosening of adhe-
sive joints and the defrosting of water lines.
Bosch Power Tools