General Information; Safety Information - RIDGID RP 340-B Manual De Instrucciones

RP 340-B, RP 340-C
Operating Instructions
Original Instructions - English

1. General information

1.1 Parts of this Operating Manual
The following are parts of this Operating Manual:
• RP 340-B/C Pressing Tool
• Press jaws
• Rechargeable battery and Mains Adapter
a. The manufacturer's Operating Manual (see designation on charger, rechargeable battery
and mains adapter) fully includes the instructions for the rechargeable battery charger, the
supplied rechargeable battery and the mains adapter. RIDGID is unable to guarantee that
these instructions are complete.
b. The EC declaration of conformity (890-011-320.10) will accompany this manual as a separate
booklet when required.
1.2 Before placing into operation
It is essential to note the following:
• Check that the consignment is complete and check the consignment for any transport
damage
• Follow the safety instructions
• Follow the Operating Manual
1.3 Studying this Operating Manual
Study the manufacturer's Operating Manual for the charger and the rechargeable battery for in-
formation on use and charging of the rechargeable battery. If you are still unclear in respect of any
aspects after studying this Operating Manual, please contact the manufacturer for your nearest
servicing agent (see warranty card for addresses).
We are unable to assume any liability for damage and loss or malfunctions resulting from non-
compliance with the Operating Manual.
1.4 Illustrations and technical modifications
Illustrations may differ from the actual devices and are not binding on our part. We reserve the right
to make technical modifications to the machines without prior announcement in order to meet the
demands of rapidly changing customer needs.
1.5 Safekeeping
Please keep this Operating Manual in a safe place.
1.6 Further information
Manufacturer
Ridge Tool Company
Elyria, Ohio, U.S.A.
Applicable to RP 340-B/C Pressing Tools.

2. Safety information

2.1 General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool"
in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
EN
RP 340-B, RP 340-C
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed
or grounded.
c. Do not expose power tools to rain or wet conditions.
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a pow-
er tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before con-
necting to power source and/or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising power tools that have the switch on
invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in mov-
ing parts.
g. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-
related hazards.
4) Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The cor-
rect power tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamil-
iar with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, break-
age of parts and any other condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instruc-
tions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in hazardous
situation.
5) Battery tool use and care
a. Recharge only with the charger specified by the manufacturer. A charger that is suit-
able for one type of battery pack may create risk of fire when used with another battery pack.
b. Use power tools only with specifically designated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
c. When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a con-
nection from one terminal to another. Shorting the battery terminals together may cause
burns or a fire.
d. Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation of burns.
Tools For The Professional
TM
Water entering a power tool will
1