PEERLESS Paramo PSP2 Instalación Y Montaje página 6

3-2
For Attachment to Drywall surface
Use mounting plate (A) as a template to mark
the two mounting holes. NOTE: In wall
mounting applications position mounting holes
in a vertical pattern. Drill two 5/16" (8 mm) dia.
holes through drywall. Insert anchors (O) in
holes flush with drywall as shown in figure 3.4.
Place mounting plate over anchors and secure
with two #12 x 1-3/4" self tapping screws (N).
Installing Arms to Mounting Plate
4
Insert arm (C) or extension arm (D) onto mounting plate attached to
surface as shown in figure 4.1 or 4.2. Extension arm can be used with arm
as shown in figure 4.3. Tighten set screws with allen wrench (P).
NOTE: Extension arm is not recommended with wall mounted
applications.
Insert mounting plate (A or B) attached on speaker into arm (C). Tighten
set screw with allen wrench (P) as shown in figure 4.4 or 4.5.
fig. 4.1
A
SET SCREW
C
fig. 4.4
A or B
C
Visit the Peerless Web Site at www.peerlessmounts.com
All manuals and user guides at all-guides.com
fig. 3.4
fig. 4.2
C
SET SCREW
6 of 18
fig. 3.5
DRYWALL
O
A O
N
A
SET SCREW
fig. 4.5
A or B
C
SET SCREW
For customer care call 1-800-729-0307 or 708-865-8870.
All other brand and product names are trademarks or registered trademarks of their respective owners.
DRYWALL
A
O
fig. 3.6
fig. 4.3
A
SET SCREW
D
C
ISSUED:10-23-07 SHEET #: 087-9016-1
© 2007, Peerless Industries, Inc. All rights reserved.
N