Charging The Mouse; English - Corsair SABRE RGB PRO WIRELESS Manual Del Usuario

CHARGING THE MOUSE

IMPORTANT: The SABRE RGB PRO WIRELESS mouse must be fully charged before its first use.
Connect the mouse to an available USB 2.0 or 3.0 port on your PC with the USB charging / data cable.
The battery / wireless status LED indicator on the mouse will begin pulsing green to denote battery charging and
will turn solid when charging is complete.
GETTING TO KNOW YOUR MOUSE
B
A C H
G
D
F
E
H
A — QUICKSTRIKE LEFT CLICK BUTTON
B — MIDDLE CLICK BUTTON / SCROLL WHEEL
C — QUICKSTRIKE RIGHT CLICK BUTTON
D — FORWARD BUTTON
E — BACK BUTTON
F — DPI CYCLE BUTTON
G — MULTI-PURPOSE LED INDICATOR
H — REPLACEABLE PTFE GLIDE PADS*
*Replacements are available at www.corsair.com.
H
I
D E
J
K
L
N O
M H
I — USB CHARGING / DATA PORT
J — OPTICAL GAMING SENSOR
K — PROFILE STATUS LED INDICATOR
L — PROFILE SWITCH BUTTON
M — POWER / WIRELESS MODE SWITCH
N — USB WIRELESS RECEIVER
O — USB CHARGING / DATA CABLE
1
SETTING UP 2.4GHz SLIPSTREAM WIRELESS
Hyper-fast sub-1ms wireless connection is designed for no-compromise gaming grade performance.
> Toggle power / wireless mode switch to "2.4GHz" position to turn on your mouse.
> Connect the USB wireless receiver to an available USB 2.0 or 3.x port located on the front panel of your PC or
nearby USB port (e.g. on CORSAIR MM700, MM800, MM1000 mousepads).
> The battery / wireless LED indicator will turn solid white when connected.
> Download the iCUE software from www.corsair.com/downloads.
> Run the installer program and follow instructions for installation.
If reconnection is required, initiate USB wireless receiver pairing via the iCUE software settings menu.
SETTING UP BLUETOOTH ® WIRELESS
Bluetooth wireless is best for everyday computing tasks, productivity, and office applications.
> Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
> Press and hold DPI CYCLE button.
> Toggle power / wireless mode switch to "BT" position to turn on your mouse.
> Follow the instructions to successfully connect your device.
> The battery/wireless LED indicator will turn solid blue when connected.
ON-THE-FLY DPI TUNING
The mouse has a unique feature where you can adjust the current onboard DPI stage setting in 50 DPI increments
without the software, so you can jump right into the action while you find the perfect sensitivity setting.
FUNCTION
INCREASE DPI BY 50 HOLD DPI CYCLE BUTTON (F) AND PRESS FORWARD BUTTON (D)
DECREASE DPI BY 50 HOLD DPI CYCLE BUTTON (F) AND PRESS BACK BUTTON (E)
HOLD DPI CYCLE BUTTON (F) THEN BOTH FORWARD (D) AND BACK
RESET DPI STAGE
BUTTONS (E) FOR 2 SECONDS
On-the-fly DPI changes are saved to the onboard memory and can be further adjusted in granular 1 DPI steps in
iCUE. If iCUE is running, then changes are saved to the software profile directly.
SHORTCUT DPI INDICATOR
BLINKS GREEN
BLINKS RED
BLINKS YELLOW
2

ENGLISH