Angelcare AC401 Manual Del Usuario página 4

AC401 INTER 03.30.2012_AC401inter 042008 12-04-09 9:19 AM Page 4
STEP 4
PAIRING THE PARENTS UNIT AND THE NURSERY UNIT
STEP 5
SCREEN AND BUTTONS
E
N
STEP 6
TICS, SOUNDS AND MOVEMENTS
TIC
All manuals and user guides at all-guides.com
Note
• AT ANY TIME after programming a function, if you wish to exit the menu selection,
press on the EXIT button. If you wish to perform additional programming press MENU
to view the next option.
SOUND MOVEMENT
If you are receiving false alarms, adjust the sensor pad sensitivity level (STEP 2).
If the parents unit is turned ON and the nursery unit is OFF, the
parents unit will start beeping after 1 minute. After 4 seconds,
the unit will shut itself off.
Note:
• The available options are programmable but you can use the units
right away, with the following factory settings :
4