Ego Power+ ZT5200L Manual Del Operador página 70

LCD
Description
Display
Left lap bar
controlling
PCBA fails.
Plug con-
see "Fault
Left lap
necting the
code" bar fails
controlling
PCBA, located
in the lap bar,
is loosened.
Right lap bar
controlling
PCBA fails.
Plug con-
see "Fault
Right lap
necting the
code" bar fails
controlling
PCBA, located
in the lap bar,
got loosened.
Parking brake
PCBA, which
Parking
is in the front
brake
frame assem-
see "Fault fails,
bly, is broken.
code" the tool
cannot be
Parking brake
driven.
switch and/or
wire is broken.
OFF Charging Port Fault
see "Fault
Charging Port Fault
code"
70
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT5200L/ZT5200L-FC
Mower
Fault code
Status
on LCD
Indicator
311/412 OFF
411/312 OFF
309/409 OFF
801 OFF
n/a Solid RED
n/a Solid RED
n/a Solid RED
204 n/a
Audio
Cause
Indicator
PCBA failure
one beep
Loose connec-
tion
PCBA failure
one beep
Loose connec-
tion
one beep PCBA failure
Wire/Switch
one beep
failure
The charging
n/a port is in open
circuit.
There is no
n/a
power supply.
The fuse is
n/a
blown.
The charging
one beep port is in open
circuit.
Solution
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.
Check the wall outlet whether there is
120V supplied or the socket is good.
Have repairs performed by a qualified
service technician.
Have repairs performed by a qualified
service technician.