Transporting The Mower - Ego Power+ ZT5200L Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TRANSPORTING THE MOWER

NOTICE: The mower must be transported on the bottom frame at all
times! Forklift should never come in direct contact with the mower!
We recommend to keep the bottom frame to facilitate the
transportation of the mower later for service.
See "TRANSPORT" chapter earlier in this manual for safety
instructions before transporting the mower.
1. Park the mower on a level surface.
2. Raise the cutting deck to the highest position.
3. Position and secure full width ramps to the trailer. Full width
ramps will minimize the risk of the mower's wheels going off
the side of the ramp.
4. Slowly back the mower onto the ramp and into the trailer
(Fig. 51).
5. Stop the mower and set the parking-brake pedal.
6. Turn off the start/stop button and remove the safety key.
7. Secure the mower as needed, using straps or cables to prevent movement during transport.
STORAGE
The following steps should be taken in order to prepare the lawn mower for storage.
Remove the battery packs from the mower and store the batteries in a cool, dry location.
Remove the safety key from the mower.
Thoroughly clean the mower. See section "CLEANING THE MACHINE" in this manual for reference.
Inspect the mower for worn or danaged parts and tighten any nuts or screws that may have become loose.
Store the mower in a dry, clean location. Do not store it next to corrosive materials, such as fertilizer or rock salt.
Store the mower in a covered, enclosed space, out of the reach of children.
NOTICE: Plastic coverings trap moisture around the mower, which causes rust and corrosion.
51
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT5200L/ZT5200L-FC
59

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Zt5200l-fc

Tabla de contenido