Motor Unit Part Description - Philips AVENT SCF393 Manual Del Usuario

English
14

Motor unit part description

1 3
2 4
8
7
Mode indicator lights
The breast pump has two modes. Below you find an explanation of these modes.
Indicator Mode
lights
Stimulation
mode
Expression
mode
Note: When you change the suction level, the display shows the selected suction level for a few
seconds and then shows the selected mode again.
Suction level indicator lights
Suction level 1: Suction level 2:
Bottom light Bottom light
flashes steady on
Note: Every time the level increases, the next light starts flashing or the flashing light becomes solid.
1 USB power inlet
5
2 On/off button with
6
pause/play function
3 Mode selection button
4 'Level down' button
5 'Level up' button
6 Indicator lights for modes
and levels
7 Tubing port for single
breast pump
8 Tubing ports for double
breast pump
Explanation
Mode to stimulate the breast to start
up the milk flow.
Mode for efficient milk removal after
milk has started flowing. After 90 sec. of
stimulation, the device automatically
switches to the expression mode.
Suction level 3:
Bottom light
steady on +
next light
flashes
No. of suction levels
8 suction levels
16 suction levels
Suction level 4: Suction level 5:
2 lights steady 2 lights steady
on. on + next light
flashes.
Suction level
16: all lights are
on