Philips AVENT SCF393 Manual Del Usuario página 8

English
8
- Wash your hands thoroughly with soap and water before you touch breast pump parts and breasts
to prevent contamination. Avoid touching the inside of containers or lids.
Warnings to avoid breast and nipple problems including pain:
- Do not use the breast pump if the silicone diaphragm appears to be damaged or broken. See
chapter 'Ordering accessories' for information on how to obtain replacement parts.
- Only use accessories and parts recommended by Philips Avent.
- There are no user serviceable parts inside the motor unit of the breast pump.
- No modification of the breast pump is allowed. If you do so, your warranty becomes invalid.
- Never use the breast pump while you are sleepy or drowsy to avoid lack of attention during use.
- Always switch off the breast pump before you remove the pump body from your breast, in order to
release the vacuum.
- If the vacuum is uncomfortable or causes pain, switch off and remove the breast pump from your
breast.
- Do not continue pumping for more than five minutes at a time if you do not succeed in expressing
any milk. Try to express at another time during the day.
- If the process becomes very uncomfortable or painful, stop using the pump and consult your
healthcare professional.
Warnings to prevent damage and malfunction of the breast pump:
- Portable radio frequency (RF) communications equipment (including mobile phones and
peripherals such as antenna cables and external antennas) should not be used closer than 30 cm
(12 in) to any part of the breast pump, including adapter. This could have a negative effect on the
performance of the breast pump.
- Use of this equipment adjacent to or stacked with other equipment should be avoided because it
could result in improper operation.
Warning to avoid increased electromagnetic emissions or decreased electromagnetic immunity of
this device, resulting in improper operation:
- Do not use any other adapter or charging cable than supplied with the device.
Cautions
Cautions to prevent damage to and malfunctioning of the breast pump:
- Prevent the adapter and motor unit from coming into contact with water.
- Never put the motor unit or the adapter in water or in a dishwasher, as this causes permanent
damage to these parts.
- Keep the adapter and the silicone tubes away from heated surfaces to avoid overheating and
deformation of these parts.