Devolo MAGIC 2 Manual página 109

41 Network configuration
To do so, enter a corresponding number of cha-
racters into the Key field.
When the WPA3 encryption standard is
enabled, the WPS function is not available for
technical reasons.
You can find more information in Chapter
4.4.7 Wi-Fi Protected Setup (WPS)
QR code
Using the QR code, you can conveniently set up the
connection to the guest network for mobile de-
vices. Scanning the QR code automatically trans-
fers the credentials for the guest network to the
respective mobile device. The QR code is visible
only if the guest network has been enabled.
4.4.4Mesh
Mesh
All devolo Magic Wi-Fi adapters offer mesh Wi-Fi,
which entails completely new and improved Wi-Fi
functions:
Multi-user MIMO technology
b
More often than not, you use multiple end
devices in your Wi-Fi network, such as a smart-
phone, tablet, smart TV or a game console. This
devolo Magic 2 WiFi 6
can present a real challenge for your Wi-Fi net-
work—it has to regulate the distribution of
data streams from the Wi-Fi access point (e.g.
router, devolo device) to the end devices.
Multi-user MIMO technology makes it possible
for your devolo device to supply your smart-
phone, tablet and other devices with data
streams simultaneously—at the speed you
require and at an efficient transfer rate.
Thanks to Multi-user MIMO technology, you
can finally enjoy using the Internet without
long wait times during online gaming, sporadic
drop-outs while streaming in HD or slow
downloads.
Fast roaming (IEEE 802.11r) streamlines the
b
registration process for Wi-Fi end devices, such
as smartphones or tablets, when switching to
another Wi-Fi hotspot.
The feature Fast roaming is not compatible
with all Wi-Fi clients. If there will be
connection problems with one of your
devices, please deactivate these option.
In factory default condition of the devolo Magic
adapter Fast roaming is turned off by default.
The access-point steering feature (AP stee-
b
ring) function enhances your Wi-Fi access