Slime 40066 Manual Del Usuario página 3

INFLATE TIRES
1
1. Push air hose valve connector on the valve stem.
2. Lock into place by pushing the handle downward.
3. Plug power cord into 12 volt accessory power outlet.
4. Turn inflator on. Inflate tire to manufacturer's recommended air
pressure. Correct tire pressure can be found in vehicle owner's
manual or on driver's side door jamb. Turn off inflator and unplug
power cord and remove air hose connector.
USING THE ADAPTERS
PULL UP TO
UNLOCK
PUSH DOWN
TO LOCK
2 3
To unlock the
hammerhead valve, pull
handle upward, then
place in adapter and push
down to lock in adapter.
4