Publicidad
Idiomas disponibles
Idiomas disponibles
When not in use store rotating beacon in vehicle so that it
does not obstruct the driver or passenger while driving.
Caution! Maximum permissible speed 80 km/h.
Rotating beacon, FL version
Attach Hella attachment tube with built-in socket on vehicle
vertically in relation to the road. Attach beacon to attach-
ment tube and screw tight after removing rubber stoppers.
Caution: Tightening torque for Allen screw: 3-5 Nm.
Changing flash tube:
Caution, flash tube is very hot following operation.
Before opening the unit, wait at least one minute.
1) Unscrew light dome and remove.
2) Unscrew ring lens
3) Unscrew cover
4) Remove defective flash tube and replace. Reassemble
flashing beacon in the reverse order.
One more tip:
Keep the light dome clean. Dirt can absorb up to 80% of the
light emitted. Do you have spare bulbs and fuses in the
vehicle?
Technical Data:
Operating voltage range: 10-15 V (12 V) 20-30 V (24 V)
Total power consumption: 12 V --> 3.3 A, 24 V --> 1.7 A
Flash energy:
10 Ws + 2Ws
Flash sequence:
Double-flash
Flash frequency:
2 Hz
Radio interference suppression: e1 Approved to 72/245
EC Edition 95/54EC in version 95/54 EC
Temperature range:
-40 °C to +60 °C
Type tested:
e1 023486, A1 E1 001765
Reverse polarity protection:
Light dome:
Polycarbonate
Housing:
ASA
Yes
14
Publicidad
