Charging The Device - Buki PV07 Manual Del Usuario

Burst:
This mode lets you take 3 photos in succession. To activate it, go
into , select "THREE Photo" and press OK.
Print Shade:
In the menu
select will determine the level of contrast in the photos you print
from the device.
In the menu
format the micro-SD/TF card and adjust the key volume, etc.

chaRging the device

Use the USB-C cable provided to charge the camera. The indicator
light is red while charging and turns green when the device is fully
charged.
Charging takes approx. 2.5 hours.
tRansFeRRing photos
To transfer your photos to a computer, use the USB-C cable
provided.
If you wish to print the photos, the ideal format
suitable for this device is the standard 10 x 15 cm
format.
When viewing the photos on a computer monitor,
the photos are enlarged and the quality may seem
poor but don't worry, it is easily sufficient for your
child to print 10 x 15 cm photos.
, select the "Print Shade" function. The option you
, you can also adjust the brightness and time,
13