Switching The Headset On/Off; How To Register The Headset On A Compatible Telephone - HumanTechnik cm-BT Instrucciones De Servicio

CM_BT_1008:BA_CM_BT.qxd
How to register the CM-BT headset on a compatible telephone
Before you can use the CM-BT with the telephone, it has to be added to
the device list in the telephone. To do so, follow the instructions in the
telephone operating manual explaining how to activate Bluetooth.
4 Select the CM-BT headset from the list of devices found. To register the
headset and establish a connection between the CM-BT headset and the
telephone, enter the following pass code: "0000".
17.11.2008

Switching the headset on/off

Slide the on/off switch up (Position •).
After approx. 3 seconds, the device is ready to
connect. The blue LED will flash slowly. If there is
a device it has already been registered with within
range, the CM-BT will connect automatically.
Once the CM-BT headset has establi shed a con-
nection, the blue status indicator will flash quickly.
To switch the headset off, slide the switch down
(Position o).
1 Switch on your telephone and the CM-BT headset.
2 Activate the "register mode" for the CM-BT
headset by holding the function key pressed
down for 6 seconds (status indicator will flash
blue/red quickly).
3 Activate the Bluetooth function on the telephone
and start your search for Bluetooth devices. You
will find the corresponding instructions in your
telephone's operating manual.
07:52 Seite 23
English 23