For Your Safety; Tool Specifications - Würth AL 30-SD-LI Traducción Del Manual De Instrucciones De Servicio Original

AL 30-SD.book Seite 7 Donnerstag, 20. April 2017 4:22 16
GB
Working safely with this machine is possible
only when the operating and safety infor-
mation are read completely and the instruc-
tions contained therein are strictly followed.
The battery charger must be operated in dry
rooms only and not in a wet environment. Wet-
ness reduces the electrical safety and increases
the risk of an electrical shock.
Class II equipment
Time-lag fuse 3.15 A
CE Conformity mark
Before each use, check the unit and battery. If dam-
age is detected, do not use the unit. Have repairs per-
formed only by a qualified technician.
Do not use the unit when the housing is damaged. The
missing protective insulation can enable interior parts to
be touched and lead to a dangerous electric shock.
Do not cover the venting slots. The battery charger
can overheat, become damaged and cause a fire.
Do not charge batteries of other manufacturers. It is
possible that such batteries are not protected against
overheating and can explode or cause a fire.
Battery charger
Part number
Input voltage
Output voltage
Charging current (max.)
Charging time for 3.0 Ah-battery, approx.
Weight, approx.
Battery
Part number
Voltage
Capacity
Cell type
Number of cells
Recommended chargers

For Your Safety

For further notes on safety refer to enclosed sheet.

Tool Specifications

AL 30-SD-LI
0700 887
220 – 240 V
9.6 – 18 V
4.1 A
45 min
0.9 kg
0700 980 230 0700 956 330
9.6 V 12 V
3.0 Ah 3.0 Ah
NIMH LI-ION
8 6
0700 887 0700 887
0700 888
This appliance is not intended to be
used or cleaned by person with re-
duced physical, sensory or mental
capabilities, or lack of experience or
knowledge, unless they have been
given instructions concerning the
safe use of the appliance by a person
legally responsible for their safety.
They should be supervised whilst us-
ing the appliance.
Children shall not use, clean or play
with the appliance, wich when not in
use should be secured out of their
raech.
Do not charge non-rechargable batteries. Such bat-
teries can explode or cause a fire.
Do not operate the battery charger on easily inflam-
mable surfaces or in combustible environments. The
battery charger can become hot and cause a fire.
Do not open the battery charger. Touching interior
parts can lead to a dangerous electric shock.
Use only original Würth parts and accessories.
AL 30-SD-LI
0700 888
220 – 240 V
9.6 – 18 V
4.1 A
45 min
1.25 kg
0700 956 430
14.4 V
3.0 Ah
LI-ION
8
0700 887
0700 888
0700 956 530
18 V
3.0 Ah
LI-ION
10
0700 887
0700 888
7