Operating Temperature - Airwell DDMX-035N-09M25 / YDAX-035H-09M25 Manual De Instrucciones

Display panel
Manual
button
MANUAL button : This button selects the mode in the following order: AUTO, FORCED COOL, OFF.
•
FORCED COOL mode : In FORCED COOL mode, the Operation light flashes. The system will then
turn to AUTO after it has cooled with a high wind speed for 30 minutes. The remote control will be
disabled during this operation.
OFF mode : When the display panel is turned OFF, the unit turns o and the remote control is
re-enabled.

Operating temperature

When your air conditioner is used outside of the following temperature ranges, certain safety
protection features may activate and cause the unit to disable.
Inverter Split Type
COOL mode
17°C - 32°C
Room Temperature
(62°F - 90°F)
0°C - 50°C
(32°F - 122°F)
-15°C - 50°C
(5°F - 122°F)
Outdoor
(For models with
Temperature
low temp. cooling
systems.)
0°C - 52°C
(32°F - 126°F)
(For special
tropical models)
Timer Infrared
indicator receiver
Operation Alarm
indicator indicator
PRE-DEF
(pre-heating/defrost)
indicator
HEAT mode
0°C - 30°C
(32°F - 86°F)
-15°C - 24°C
(5°F - 75°F)
LED display
FOR OUTDOOR UNITS
DRY mode
WITH AUXILIARY
10°C - 32°C
ELECTRIC HEATER
(50°F - 90°F)
When outside
temperature is below 0°C
(32°F ), we strongly
recommend keeping the
unit plugged in at all
0°C - 50°C
time to ensure smooth
(32°F - 122°F)
ongoing performance.
0°C - 52°C
(32°F - 126°F)
(For special
tropical models)
Page 9
 