Operating Methods; Unpacking The Air Conditioner - Airwell MFH Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

STRUCTURE
Front
Rear
3 STRUCTURE
Air outlet
Control panel
Handle
Upper air inlet grille
Heated air emission
vent
Lower air inlet grille
Power cord

OPERATING METHODS

USAGE NOTICE
The working range of COOL mode and DRY mode is 17°C (61 °F) - 35°C (86°F).
The Max cooling operation temperature for the air conditioner is 35 °C (95°F) .

Unpacking the Air Conditioner

Excessive Weight Hazard
■ Use two or more people to move and install the air conditioner.
■ Failure to do so can result in back or other injury.
Remove packaging materials
■ Remove and properly dispose of the packaging materials. Remove tape and glue residue from surfaces before
warm water and dry the air conditioner.
products can damage the surface of your air conditioner.
Location requirements:
• The appliance shall be installed in accordance with national wiring regulations.
• The appliance is for indoor use only, but may not be installed in a laundry room.
• Place the air conditioner on a smooth, level floor that is strong enough to support the unit.
• Allow at least 12 inches (50 cm) of air space on all sides of the unit for good air ventilation.
12" (50 cm)
min.
• Place the unit in an area where the temperature will not fall below 18°C (65°F ). The coils will be covered with frost
at temperatures below 18°C(65°F) and this may reduce performance.
NOTE: The portable air conditioner has casters for easy movement, but it should only be rolled on smooth, flat
surfaces. Do not attempt to roll the portable air conditioner on a carpet or over objects.
WARNING
12" (50 cm)
min.
OPERATING METHODS
4

Publicidad

Tabla de contenido
loading

Tabla de contenido