Panasonic AW-E750E Instrucciones De Operación página 37

w TOTAL PEDESTAL LEVEL ADJUSTMENT
(Use an oscilloscope or a waveform monitor for this
adjustment.)
This step is to adjust the black levels (pedestal levels) of two
or more cameras to be the same.
[ADJUSTMENT by CAMERA or multi hybrid control panel]
1. Close the lens.
2. Select Pedestal item in the brightness setting Sub Menu
(Select [Pedestal] in the [Iris, Shutter, Gain Set] sub
menu in USER MODE.)
3. Set the pedestal level to 0.025 V with the YES/ABC
switch or the NO/BAR switch.
NO/BAR Switch
YES/ABC Switch
[ADJUSTMENT with RCU or ROP]
Adjust the pedestal level to 0.025 V with the total pedestal
adjustment control or PED dial.
Total pedestal
adjustment control
Remote control unit
0.025 V
- 36 (E) -
PED dial
Remote operation panel