Technical Characteristics - Virutex TM33W Manual De Instrucciones

En la inquietud continua por la mejora y actualización de
sus productos, VIRUTEX se reserva el derecho de modificarlos
sin previo aviso.
E N G L I S H
TILTABLE MITRE SAW TM33W-TS33W
Important note
Before using the machine carefully read the
GENERAL SAFETY INSTRUCTIONS LEAFLET,
which is included in the machine documen-
tation. Keep the leaflet safely along with
this INSTRUCTION MANUAL for possible
future consultations.
SYMBOLS
The following symbols can be important for the operation
of your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol Meaning
Do not direct the laser beam at persons
or animals and do not stare into the laser
beam yourself, not even from a distance.
This power tool produces class 3 laser
radiation according to EN60825-1. This ra-
diation can lead to persons being blinded.
Laser output hole
Only for European Union countries: Do
not dispose of power tools into household
waste! According the European directive
2002/96/EC for waste electrical and elec-
tronic equipment and its implementation
into national laws, power tools that are no
longer usable must be collected separately
and disposed of in an environmentally
correct manner.
Wear safety goggles.
Wear ear protectors. Exposure to noise
can cause hearing loss.
8
Symbol Meaning
Wear a dust protection mask.
Danger area! Keep hands, fingers or arms
away from this area.
Symbol for use of the mitre saw as a chop
and mitre saw.
Symbol for use of the mitre saw as a
table saw.

1. TECHNICAL CHARACTERISTICS

Input power...................................................1500 W
Motor.........................................................50/60 Hz
No-load speed..........................................3700/min
Type of laser...................................................................650 nm
Laser class................................................................................3 R
Dimensions of saw disc:
External diameter.........................................300 mm
Internal diameter............................................30 mm
Revolving table:
Adjustable, right and left to 45° with fixed stops at 0°, 15°,
22,5°, 30° and 45°.
Tilting head:
Can tilt from 90 to 45° at any position of the revolving table
from 0° to 45° to the left of the same.
Weight.............................................................20 kg
Packing dimensions.....................590x580x450 mm
Weighted equivalent continuous
acoustic pressure level A...................................................96 dBA
Acoustic power level A....................................................107 dBA
Uncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
Uncertainty....................................................................K: 1.5 m/s
2. MAXIMUM CUTTING CAPACITY
-Cut at 0°x 0° (Fig. 25).......................160x95 mm
(with 36 mm supplement).........................200x45 mm
-Cut at 0°x45° (Fig. 26).............................160x64 mm
-Cut at 45°x0° (Fig. 27)............................110x95 mm
-Cut at 45°x45° (Fig. 28)...........................75x64 mm
-Cut on upper table (*)...............................max 55 mm
(*) Only for model TM33W
<5 mW
: 3 m/s
2
h
2