Sauder 109872 Manual De Instrucciones página 28

Step 24
With someone's help, carefully position the 109872 U-Shaped Connector
å
Kit next to the 109843 Executive Desk as shown in the diagram.
Fasten both CONNECTOR PLATES (O) to the bottom of the MOLDINGS
å
on the U-Shaped Connector Kit and Desk. Use eight BLACK 9/16" LARGE
HEAD SCREWS (BB) through each PLATE and into the pre-drilled holes in
the MOLDINGS.
Now, fasten the MODESTY PANEL (F) to the Inner End on the Desk. Use
å
three BROWN 1-1/2" FLAT HEAD SCREWS (Y) with WASHERS (V) through
the holes in the MODESTY PANEL and into the pre-drilled holes in the
Inner End on the Desk.
IMPORTANT: The 109872 U-Shape Connector Kit must be attached to the
å
109843 Executive Desk as indicated in this step.
O
109872
U-Shape
Connector Kit
Page 28
Return Kit on the LEFT
BLACK 9/16" LARGE HEAD SCREW
(16 used for the PLATES)
E2
F
Fasten the MODESTY PANEL (F)
along this edge of the Inner End
on the 109843 Executive Desk
using three 1-1/2" FLAT HEAD
SCREWS (Y) and WASHERS (V).
V
(3 used for the MODESTY PANEL)
BB
109843
Executive Desk
BROWN 1-1/2" FLAT HEAD SCREW
(3 used for the MODESTY PANEL)
109872
Y
www.sauder.com/services