Emptying The Collector Box; Overload Protection; Restart Prevention; Working Methods - FLORABEST TLH 2500 A1 Traducción Del Manual De Instrucciones Original

Desmenuzador silenciosa
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GB
MT
Make a loop at the end of
the extension cable and
hang the loop onto the
strain relief on the mains
cable (
Connect the extension cable.
Make sure that the funnel feeder is empty.
1. To switch on, push the operating
mode selection switch (
forward and turn the operating mode
selection switch to the right.
The operating mode selection switch
locks into place.
Turn the operating mode selection
switch past the resting point to start
the equipment.
2
1
Place your chopping material in the fill
hopper. The material is drawn in and
chopped.
2. To switch off, turn the operating mode
selection switch (
The shredder will continue to run im-
mediately after switching off.

Emptying the collector box

Do not leave it until too late to
empty the collector box. Remem-
ber that the collector box fills un-
evenly under the ejector opening.
46
All manuals and user guides at all-guides.com
5).
A
A
9) lock
9) back to the left.
A
1. Switch the shredder off.
2. Unlock the collector box (
ing the safety switch (
position.
3. Remove the collector box (
the chassis (
12) and empty it.
A
4. Make sure that the area around the
safety switch (
A
chippings before you reattach the col-
lector box (
2).
A
5. Reattach the collector box (
place the safety switch (
position.

Overload protection

In the event of overload, e.g. due to
branches that are too thick, the equipment
automatically switches off.

Restart prevention

After switching off automatically as a re-
sult of overload, the equipment will not
restart automatically.
To switch back on, start by turning the op-
erating mode selection switch (
"OFF" position.
Press the reset switch (
Switch the device back on.

Working methods

General working instructions

Keep enough distance to the
shredder since long branches can
be spun off while being drawn into
the shredder.
Wear ear and eye protection
Wear hand protection
2) by plac-
A
A
3) in the OFF
2) from
A
3) is free of wood
A
2) and
3) in the ON
A
9) to the
A
7).
A

Publicidad

Tabla de contenido
loading

Tabla de contenido