Plug & Play For The Handset (Option); Handling The Power Cable Correctly - wissner-bosserhoff movita Manual De Instrucciones

9. Plug & Play for the handset (option)
It is possible using the plug & play option to relocate the handset quickly and conveniently
from one side of the bed to the other side:
▪
Unplug the power plug of the bed from the mains power outlet
▪
If the handset should be moved from the left to the right side, unplug the the multi-pin con-
nector from the left connection and seal the socket with the attached plug.
▪
Connect the connector to the right connection after the plug has been removed from the
socket.
▪
The buttons of the handset are illuminated when the bed is connected to the power supply.

10. Handling the power cable correctly

The movita nursing bed is equipped with a coiled cable with a plastic hook attached to it.
When moving the bed, make absolutely sure not to drag the power cable across
the floor, squash it or run over it with the bed castors. Also keep this in mind when
operating/adjusting the bed. The cable must be able to follow each of the bed's
movements freely. Put any excess length of cable on the plastic hook in a figure-of-
eight loop.
Do not touch the power cable with wet hands and always hold the plug when pulling
it out of the socket.
92
▪
If you want to move the nursing bed, hang the power
cable hook on the top edge of the head section. This
prevents running over the cable accidentally.
▪
Regularly check the mains power supply connection
cable, the correct insertion of the power plug, the
power plug case and the case inlets on the bed for
damage to rule out hazards.