Setting Up The Bed; Technical Data For The Bed / Nameplate - wissner-bosserhoff Carisma Manual De Instrucciones

4.

SETTING UP THE BED

Technical Customer Service of Wissner-Bosserhoff GmbH.
all around the bed for all adjustment positions
treme positions of the bed,
installations must be taken into account, as protection from entrapment.
safety clearance
The
cm
.
such as wall-mounted bumpers and corner guards, RCB switches etc.
the use of extension cables or multiple adapters
should be avoided.
5.

TECHNICAL DATA FOR THE BED / NAMEPLATE

For an explanation of the respective nameplate details – see Appendix B
Outer dimensions:
Nominal dimension of
patient surface:
Safe workload patient surface:225 kg (210 kg patient = 225 kg SWL - 15 kg mattress
Tilting:
Bed weight:
Protection type:
Noise level:
an additional safety clearance of 2.5 cm
mechanical and electrotechnical protective measures,
useful wall sockets for the mains connection
approx. 208 x 106 cm (depending on the wooden linning)
90 x 200 cm
depending on the model (measured central
section)
and accessories)
When using heavier or lighter mattresses and accessories
larger/smaller than 15 kg, the permissible patient weight
changed accordingly!)
approx. sitting position 13° /legs up position 15°
approx. 125 kg
IPX4
approx 57 dB/A
(including the tilting function). For the ex-
that may lie unsecured on the
1
at least 20
for the
-
Page 67