Settings; Initial Operation - Festool DOMINO XL DF 700 EQ Manual De Instrucciones

WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.

Initial operation

WARNING
Risk of injury, electric shock
Always pull the plug out of the socket before per-
forming any type of work on the machine!
With the joiner unplugged, inspect the mortis-
ing bit. Make sure it is not bent, chipped, or oth-
erwise damaged, and make sure the bit is fully
tightened on the spindle (Refer to "Settings
Changing tools").
WARNING
Mortising bits that are bent or damaged should no
longer be used.
Risk of injury
Check regularly whether the mortising bit is in
good condition.
10
All manuals and user guides at all-guides.com

Settings

-
Peel off the protective film [2-1] from the bot-
tom of the joiner baseplate.
Remove the transport safety device [2-2].
2-2
2
2-1