Before You Begin - Barrette Bella Premier Serie Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the product or individual.
• Check local building codes to determine pool-safe product options.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store. For assistance or replacement parts call: 1-877-265-2220.

BEFORE YOU BEGIN:

It is the responsibility of the installer to meet and/
or exceed all code and safety requirements and to
obtain all required building code permits.
The deck and railing installer should determine
and implement appropriate installation techniques
for each installation.
Gate Kit Component list:
# QTY.
1 2 Vinyl Uprights
2 2 Vinyl Rails
3 7* Balusters
4 2 Caps
#15-13 x 6" Pan Head
5 8
Square Drive Screws
6 1 Glue
For round aluminum balusters: Foam tape is
included and should be placed inside the top and
bottom rails to prevent rattle.
*For turned balusters gate kits: kits include one
long square baluster that gets inserted into the
bottom rail and turned balusters sit on top of it to
keep the height and position of the turned baluster
style correct and in line with installed railing.
To obtain and review a copy of the warranty please visit barretteoutdoorliving.com.
You may also contact us at 1-877-265-2220 or email CS.outdoorliving@ebarrette.com.
2
Description
TOOLS/MATERIALS NEEDED:
Safety Goggles
Tape Measure
Level
Hacksaw or Chopsaw
Rubber Mallet
Drill
/ " and /
3 1
32
#2 Square Drive Bit
2" Wood Spacer Blocks
Pencil
4
5
2
1
5
2
6
" Drill Bits
8
3
5
4
5