Before You Begin; Tools Needed; Kit Components - Barrette Xpanse BOM-34107756 Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the product or individual.
• Not pool code approved.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.

BEFORE YOU BEGIN:

Vinyl gate posts require an internal support
system for weight-bearing purposes
therefore a post stiffener is required. Post
stiffener needs to be purchased separately.
Fence
Top View of Routed Post Top View of Routed Post

Kit Components:

Qty Description
2 Gate Uprights
4 C-Bracket Assemblies
4 Large Straps
4 Small Straps
2 Upright Caps
2 Boerboel Hinges
®
1 Locking Bar
1 Boerboel Latch
®
1 Glue
Gate Upright
2
Purchased
Stiffener
Kit Fasteners:
Qty Description
24 #8 x ⁄ ⁄ ⁄ " Square Bit Screws ⁄
3 3 3
4 4
16 #10 x ⁄ ⁄ ⁄ " Square Bit Screws ⁄
3 3 3
4 4
24 1 ⁄ ⁄ ⁄ ⁄ " #2 Square/Phillips Combo Self-Tapping Screws
1 1 1
2 2
10 #10 x 1" Phillips Self-Drilling Screws
4 Spacers
Gate Upright
Glue
Hinges Hinges Hinges
Latch Latch

TOOLS NEEDED:

Safety Glasses Safety Glasses
Tape Measure Tape Measure
Drill
#2 Square Bit #2 Square Bit
Phillips Bit/Screwdriver Phillips Bit/Screwdriver
⁄ ⁄ ⁄ " Drill bit ⁄
3 3 3
32 32
⁄ ⁄ ⁄ ⁄ " Wrench
11 11 11
16 16
⁄ ⁄ " Wrench ⁄ ⁄
5 5 5
8 8
Level
Square Square
Pencil
2" Spacer Blocks 2" Spacer Blocks
Small Straps
Large Straps
Locking Bar Locking Bar
Upright Caps
C-Bracket Assemblies