Tape Operation; Playing A Tape; Recording On A Tape - Sony AIWA CSD-MP100 Instrucciones De Manejo

TAPE OPERATION

• Use Type I (normal) tapes only.
• The player plays (records on) the side facing out.

Playing a tape

1
Select TAPE/6STANDBY with
FUNCTION.
2
Press Z STOP/EJECT to open the
cassette compartment and insert a
recorded tape.
Insert it with the exposed side up and the side to
be played facing out.
Then close the compartment.
3
Press x PLAY.
The power is turned on and playback starts.
During tape operation, "TAPE" is displayed.
Additional operations
Z STOP/EJECT - Stops play. The power is tuned
off.
a PAUSE - Pauses play. To resume play, press
again.
f FF, g REW - Fast-forwards or rewinds a tape.
To stop the winding, press Z.
VOLUME - Adjusts the volume.
T-BASS - Enhances low-frequency sound. Press to
turn it on or off.
All manuals and user guides at all-guides.com

Recording on a tape

1
2
3
Additional operations
Z STOP/EJECT - Stops recording.
a PAUSE - Pauses recording. To resume recording,
press again.
Tips
• Volume or tone adjustment does not affect recording.
• For the best results, use the AC power as a power
• To erase recording, insert a tape and press w REC
If a high-pitched sound is heard during AM
recording, press REPEAT/MODE (or MODE on the
remote) repeatedly to display "BEAT 1", "BEAT 2" or
"BEAT 3", and select the position that eliminates the
noise.
PAUSE
STOP/EJECT FF
Press Z STOP/EJECT to open the
cassette compartment and insert a blank
tape.
Insert it with the exposed side up and the side to be
recorded on facing out.
Then close the compartment.
Get ready to record from the source.
To record from a CD, select CD with FUNCTION
and load the CD.
To record from a radio broadcast, select RADIO
with FUNCTION and tune to a station.
(See the following pages)
Press w REC to start recording.
x PLAY is pressed simultaneously.
When recording from a CD, press E to start
playback.
source when recording.
while the power is off.
REC
REW PLAY
5
ENGLISH