Keysight Technologies EDU36311A Manual Del Usuario página 13

Item
2 Output selection keys
Selects an output to control. The lit key indicates the selected output.
Tip: When this key is selected, pressing this key again will toggle between multiple and single output view.
3 Voltage/Current knobs
Set the voltage and current of the selected output.
4 Meter View and Tracking keys
– [Meter View] turns on the meter view for the selected output.
– [Tracking] turns on or off the track mode for output 2 and 3.
5 Navigation keys.
– Navigate through the control dialog windows; press [Select] key to select a control.
6 Numeric keypad
– Enters numeric values. Press [Enter] key to complete the entry.
– Deletes the values entered into the dialog using the back key.
7 All Output On/Off key
Turns all outputs On and Off according to the specified turn-on and turn-off delays.
8 Output On key
Turns individual outputs On or Off; outputs are on when the key is lit.
9 Output terminals
10 Softkeys
Accesses the soft front panel menu. The Back key moves back in the softkey menu hierarchy.
11 Earth ground reference
12 USB port
Allows an external USB flash drive to be connected to the instrument.
The EDU36311A supports USB flash drives with the following specification: USB 2.0, FAT32 format, up to
32 GB. We recommend using SanDisk Cruzer Blade flash drive for the front panel USB port.
13 Power switch
Turns on the instrument.
Keysight EDU36311A User's Guide
Description
13