Prepare Instrument For Use; Initial Inspection; Standard Shipped Items; Documentation And Firmware Revisions - Keysight Technologies EDU36311A Manual Del Usuario

Prepare Instrument for Use

Initial inspection

When you receive your power supply, inspect it for any obvious damage that may have occurred during shipment. If
there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office immediately. Refer to
www.keysight.com/find/assist.
Until you have checked out the power supply, save the shipping carton and packing materials in case the unit has to
be returned. Check the list under

Standard Shipped Items

and verify that you have received these items with your
instrument. If anything is missing, please contact your nearest Keysight Sales and Support Office.
Standard shipped items
– Keysight EDU36311A DC power supply
– AC power cord
– Quick Start Guide
– Certificate of calibration
– China RoHS Addendum
– Keysight safety leaflet

Documentation and firmware revisions

The Keysight EDU36311A documentation listed below can be downloaded for free through our website at
www.keysight.com/find/EDU36311A-manuals.
– Keysight EDU36311A Triple Output Programmable DC Power Supply User's Guide. This manual.
– Keysight EDU36311A Triple Output Programmable DC Power Supply Programming Guide.
– Keysight EDU36311A Triple Output Programmable DC Power Supply Quick Start Guide
– Keysight EDU36311A Triple Output Programmable DC Power Supply Service Guide.
For the latest firmware revision and firmware update instruction, go to www.keysight.com/find/EDU36311A-sw.

Recommended calibration interval

Keysight Technologies recommends a one year calibration cycle for the EDU36311A programmable DC power
supply.
Keysight EDU36311A User's Guide 17