Interface Connections - Keysight Technologies EDU36311A Manual Del Usuario

Interface Connections

USB connections
LAN connections - site and private
This section describes how to connect to the various communication interfaces on your power supply. For further
information about configuring the remote interfaces, refer to
If you have not already done so, install the Keysight IO Libraries Suite, which can be found at
sight.com/find/iolib. For detailed information about interface connections, refer to the Keysight Tech-
nologies USB/LAN/GPIB Interfaces Connectivity Guide included with the Keysight IO Libraries Suite.
USB connections
The following figure illustrates a typical USB interface system.
1. Connect your instrument to the USB port on your computer using a USB cable.
2. With the Connection Expert utility of the Keysight IO Libraries Suite running, the computer will automatically
recognize the instrument. This may take several seconds. When the instrument is recognized, your computer will
display the VISA alias, IDN string, and VISA address. This information is located in the USB folder. You can also view
the instrument's VISA address from the front panel menu.
3. You can now use Interactive IO within the Connection Expert to communicate with your instrument, or you can
program your instrument using the various programming environments.
The USB cable is not recommended to be longer than 3 meters.
LAN connections - site and private
A site LAN is a local area network in which LAN-enabled instruments and computers are connected to the network
through routers, hubs, and/or switches. They are typically large, centrally-managed networks with services such as
DHCP and DNS servers. The following figure illustrates a typical site LAN system.
1. Connect the instrument to the site LAN or to your computer using a LAN cable. The as-shipped instrument LAN
settings are configured to automatically obtain an IP address from the network using a DHCP server (DHCP is set
On). The DHCP server will register the instrument's hostname with the dynamic DNS server. The hostname as well
26
Remote Interface Configuration.
Keysight EDU36311A User's Guide
www.key-