Power On Setting; Set To Defaults - Keysight Technologies EDU36311A Manual Del Usuario

– Press Rename to rename the selected file.
– Press Delete to delete the selected file.
– Press Recall to recall the instrument state from the selected storage location.

Power On Setting

Power On selects the state that will be loaded at power-up. This can be either the factory default state (Factory
Default), or user-defined states (State 0 to State 9).
Press Set Power On to save the setting.

Set to Defaults

Set to Defaults loads the instrument's factory default state.
Keysight EDU36311A User's Guide 55