View The Error Log - Keysight Technologies EDU36311A Manual Del Usuario

View the error log

Press Utilities > Help > Error to display the error log.
Press OK or [Meter View] to return to the meter-view display.
– Errors are stored in the order they are received. The error at the end of the list is the most recent error.
– If there are more than 20 errors in the queue, the last error stored is replaced with -350,"Queue overflow". No
more errors are stored until you remove errors from the queue.
– Errors will be cleared after you have read them or after an instrument reset.
If you suspect that there is a problem with the power supply, refer to the Troubleshooting section in the Service
Guide.
42 Keysight EDU36311A User's Guide