Intended Use; Safety Notes - BGS technic 70069 Instruction Manual

ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.

INTENDED USE

This tool is used to pull in bearing shells on joint heads and pedal cranks for bicycles.

SAFETY NOTES

•
When working with this tool set, always wear gloves and safety glasses.
•
When working, ensure for a safe and anti-slip stand.
•
Check the state of the tool at regular intervals and do not use it if damaged.
•
Make sure that the tool is mounted correctly.
•
Do not over tighten or apply excessive force to the spindle as this could otherwise damage the
tool as well as the component.
•
Use the tool only for work it is intended for.
•
Observe the generally applicable safety instructions.
•
Grease the spindle thread before using the tool.
•
Keep children and unauthorised persons away from the work area.
•
Do not let any children play with this tool or its packaging.
•
Make sure that the work area is sufficiently illuminated.
•
Keep the work area clean, organised, dry and free from other materials.
•
Do allow untrained persons work with this tool set.
•
Always work according to the specifications of the bicycle manufacturer. These instructions
serve exclusively for illustrating the product and never replace the service literature.
ALLOCATION
Bearing size
1"
1.1/8"
1.1/4"
1.1/2"
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Press tool for bearing shells
Step size
Ø25.0 - 29.5 mm
Ø29.5 - 32.5 mm
Ø32.5 - 39.0 mm
Ø39.0 - 50.0 mm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70069
Pull in length
40 - 250 mm
60 - 290 mm
80 - 330 mm
100 - 370 mm
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed