Statement 1058-Power And Relay Connector; Statement 1064-Grounded Equipment; Statement 1073-No User-Serviceable Parts; Statement 1074-Comply With Local And National Electrical Codes - Cisco ASR 920 Serie Manual Del Usuario

Statement 1058—Power and Relay Connector
Warning When you connect or disconnect the power and/or alarm connector with power applied, an electrical arc can
occur. This could cause an explosion in hazardous area installations. Be sure that all power is removed from the
switch and any other circuits. Be sure that power cannot be accidentally turned on or verify that the area is
nonhazardous before proceeding.
Statement 1064—Grounded Equipment
This equipment is intended to be grounded to comply with emission and immunity requirements. Ensure that the
Warning
switch functional ground lug is connected to earth ground during normal use
Statement 1073—No User-Serviceable Parts
No user-serviceable parts inside. Do not open.
Warning
Statement 1074—Comply with Local and National Electrical
Codes
Installation of the equipment must comply with local and national electrical codes.
Warning
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
12
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
OL-32476-01 Rev. V4