General Description; Extent Of The Delivery; Overview - Parkside PTK 2000 D3 Manual Del Usuario

Caution! When using equipment, certain safety precautions
must be complied with in order to avoid injuries and damage.
You should therefore read these operating instructions / safety
instructions carefully. Keep these in a safe place so that the infor-
mation is available to you at all times. Should you give the de-
vice to anyone else, please give them these operating instructions
/ safety instructions as well. We assume no liability for accidents
or damage caused by failure to observe these instructions or the
safety instructions. Changes to the machine will cause the ma-
nufacturer's liability with respect to any resulting damage to be
completely excluded. Even when the device is used in accordan-
ce with the designated purpose, it is nevertheless not possible to
completely eliminate certain residual risk factors. Due to the de-
sign and structure of the machine, the following risks may occur:
• Touching the saw blade in the area of the saw which is not co-
vered;
• Reaching into the running saw blade (cuts)
• Kickback of workpieces and workpiece parts.
• Saw blade breaks.
• Ejection of faulty hard metal parts of the saw blade.
• Hearing damage if the necessary hearing protection is not used.
• Emissions of wood dust which are harmful to the health when
used in closed rooms.
Please note that the use of our devices in accordance with the desi-
gnated purpose does not include commercial, handicraft or industrial
applications. We assume no warranty if the device is used in commer-
cial, handicraft or industrial businesses or for equivalent purposes.

General description

Extent of the delivery

Carefully unpack the appliance and check that it is complete:
- Saw table with pre-assembled
carbide-tipped saw blade with 24 teeth
carbide-tipped saw blade with 48 teeth
(additionally enclosed)
- Blade guard
- Riving knife with laser
- Batteries 1.5V AAA (2x)
- Parallel stop
- Stop rail
- Transverse stop
- Table width extender (2x)
- Table length extender
- Push stick
- Legs (4x)
- Central struts (4x)
- Rubber feet (4x)
- Stand brackets (2x)
- Table supports, short (4x)
- Table supports, long (2x)
- Instruction for use
Mounting Material
- Bag A for base frame, centre struts and stand brackets:
(a) Hexagonal bolt with collar, 8 pieces;
(b) Carriage bolt, 12 pieces;
(c) Washer, 12 pieces;
All manuals and user guides at all-guides.com
- Bag B for table length/width extension and collection bag:
Tools
- (h) Hexagon socket wrench HX 6
- (k) Ring spanner AF 10/22
- (i) Open-ended spanner AF 8/10
Additional tools required
- Phillips screwdriver

Overview

10
16
17
18
(d) Spring washer, 12 pieces;
(e) Nuts, 12 pieces
(f) Hexagonal bolt with Phillips head with mounted
washer/spring washer, 12 pieces;
(c) Washer, 6 pieces;
(e) Nuts, 6 pieces;
(g) Carriage bolt, small with two nuts, 4 pieces
The illustrations are on the fold-out pages.
1 Saw table
1
2 Saw blade guard
3 Riving knife (not visible)
4 Saw blade (not visible)
5 Table insert
6 Parallel stop
7 Table width extender
8 Cam lever
9 Locking handle
10 Scale
11 Handwheel
12 Crank handle
13 Base frame
14 On/off switch
15 Collection bag for wood residues
16 Guide rail
17 Table length extender
18 Suction adapter
2
19 Push stick
20 Bracket for saw blade storage
21 Legs (4x)
4
22 Central struts (4x)
23 Rubber feet (4x)
24 Stand brackets (2x)
5
25 Attachment points
26 Table brackets, short
27 Table supports, long
28 Countersunk screws of the table insert
29 Fixing screws of the riving knife
30 Slot in the riving knife
GB IE
21