Hansgrohe Focus E 31740000 Manual Del Usuario página 16

Important! The fitting must be installed, flushed and
tested after the valid norms!
Assembly
1. Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
32420000: The flow is changed from bath to shower
function by pulling the knob at the upper side of the
spout. After shutting off the water flow, the mixer
returns automatically to the bath function.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
( 1 MPa = 10 bar = 147PSI )
Hot water temperature:
Recommended hot water temp.:
Centre distance:
Connections G ½":
Rate of flow:
anti-pollution function
Test certificate
DVGW
31740000 X
31753000
31760000 X
31773000
4
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80° C
65° C
cold right - hot left
ca. 22 l/min 3 bar
P-IX SVGW
PA-IX
X
9627/IBB
X
P-IX
X
9626/IB
X
English
To adjust the hot water limiter on single lever
mixers, please see page 6.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0,15 MPa.
Important!
The non return valves must be checked once a
year.
Spare parts (see page 3)
1 handle
1.1 screw cover
2 flange
3 nut
4 cartridge cpl.
5 flange
6 S - unions
7 aerator cpl.
8 selector assy
9 diverter knob
10 non return valve
ACS
X
X
NF WRAS
X X
X
31791000
96338000
96656000
96690000
92730000
94135000
94140000
13956000
94077000
94078000
94074000
KIWA
X
X