Info" Menu; Languag." Menu; Operation; Switching The Device On And Off - Sartorius Entris II Essential BCE Serie Manual De Instrucciones

Operation

7.3.21 "INFO" Menu

Parameter Setting values
VERSION
SER. NO.
Model
BAC VER.
* Factory setting

7.3.22 "LANGUAG." Menu

Parameter Setting values
LANGUAG. ENGLISH,
DEUTSCH,
FRANC., ITAL.,
ESPANOL,
PORTUG.,
РYССKИИ,
POLSKI
* Factory setting
8 Operation
8.1 Switching the Device On
and Off
Requirements
The device is connected to the power supply.
Procedure
CAUTION Pointed or sharp-edged objects may
t
damage the operating display!
Only touch the operating display with your fingertips.
t
To switch the device on: Press the [On/Off] button.
t
To switch the device off: Press and hold the [On/Off]
t
button.
32 Entris BCE Operating Instructions
®
Explanation
Displays the version number of the control module.
Displays the serial number of the device.
Displays the type designation of the device.
Displays the version number of the weight sensor.
Explanation
Defines the menu language.
8.2
In order to provide accurate weighing results, the device
must have reached the necessary operating tempera-
ture. The operating temperature is reached after the
warm-up time. The warm-up time starts when the device
is switched on.
Procedure
Switch on the device.
t
Wait until the operating temperature is reached
t
(warm-up time see Chapter "15.7 Warm-up Time",
page 44).

Waiting for the Warm-up Time

If a weighing process is carried out on a
conformity-assessed device during the
warm-up time: The weight value is marked
as invalid.