How To Disassemble: Chamber - nama Vitality 5800 Manual De Instrucciones

10

How to Disassemble: Chamber

* Please clean all the parts before rst use.
Turn the hopper counterclockwise, so the safety
1
line on top of lid moves from lock symbol to
unlock symbol on outside of chamber, then pull
up to remove.
NOTE
If hopper lid is stuck or di cult to remove:
Place chamber set on base, press [REV] button for about
10 seconds, allow to stop. Keeping chamber set on base,
turn hopper counterclockwise using the chamber and
base for leverage.
2
Disassemble the auger, strainer and spinning
brush from the chamber.
3
Pull out the auger holding both sides of wing.
4
Disassemble the spinning brush and strainer.