How To Clean: Silicone Parts - nama Vitality 5800 Manual De Instrucciones

21

How to Clean: Silicone Parts

Juice Cap Packing
Mid gear
Push the mid gear from the bottom side of
the chamber and then pull the gear out from
the other side.
Spinning Brush
Open the juice cap, hold the chamber and juice cap
with one hand, and remove the juice cap packing
with your other hand to disassemble.
Please be careful not to drop or damage the juice
cap and chamber when disassembling the unit.
Replace the mid gear after cleaning by pressing
down rmly into place.
1
Remove the silicone brush from the
spinning brush holder.
Please follow the recommended method to
separate the silicone brush. Otherwise, it may
cause damage to spinning brush holder and
silicone brush.
2
Use a cleaning brush and wash the
inside and outside of the spinning brush
holder under running water.
Wash the silicone brush under running water
using the same method.