How To Use: Overview - nama Vitality 5800 Manual De Instrucciones

17

How to Use: Overview

작동스위치
ON
REV
작동스위치
정회전
ON
REV
역회전
정회전
Press
ON
ON
[REV]
Reverse
역회전
Pusher
Upper
hopper
chute
Side
hopper
chute
ON
ON
off(정지)
Stop
[REV]
Reverse
1
Place the pulp control lever into CLOSE
( ) position before operating.
2
Press [ON] button to start.
For your safety, this appliance only works when
it's correctly assembled with chamber set.
3
Put ingredients gradually in the hopper
chute and press with the pusher.
Do not press the ingredients with anything
except the pusher provided. Ingredients need
to be appropriate size to t in the hopper chute.
When you extract over 13.5 oz (400 ml) at once,
please open the pulp control lever every 13.5 oz (400
ml) to help release the pulp from strainer.
4
Juice: Place the pulp control lever in half-
open ( ) when putting the last ingredients.
Sorbet: Only use with pulp control lever in
close (
When using juice or smoothie strainer, after
extracting 13.5 oz (400 ml), toggling the pulp
control lever between half-open and close
position a few times will help release the pulp
residues and make it easier to open the hopper.
5
After extraction is completed, press the
reverse [REV] switch position.
For safety, allow the machine to come to a complete
stop. Press [REV] button for about 10 seconds to
loosen up pulp and allow for easier disassembly.
NOTE
When using [ON] or [REV] button, make sure
that the auger is completely stopped before
pressing either button.
) position.