How To Use: Pulp Control Lever By Mode - nama Vitality 5800 Manual De Instrucciones

18

How to Use: Pulp Control Lever by Mode

*
The pulp control lever is between the juice cap and pulp outlet.
[ ]
Preparation/Extraction mode
[ ]
Sorbet mode
[ ]
Completion, Simple Cleaning Mode
[ ]
Cleaning Mode
NOTE
When it is hard to open the hopper after the operation: Place the pulp control lever into half-closed ( )
position and press Reverse button for about 3~4 seconds. Repeat this for 2~3 times and the hopper will be
open easily.
Always start operation with the pulp control lever in close
position. When you are extracting more than 13.5 oz (400
ml) at one time, please toggle lever between half-open and
close position and leave in half-open position to help release
the pulp residues.
Close ( ) the pulp control lever to use since the
pulp is not released separately.
For easier cleaning, and to open the hopper more easily,
release the pulp residues by toggling the lever between the
half-open and close position and leave in half-open position
when you are putting in last ingredients for extraction.
For Simple Cleaning Mode, place the pulp control lever into
half-closed ( ) position and release the residues.
When detaching and cleaning the chamber, place the pulp
control lever completely into (
You can easily and conveniently clean the chamber.
) position.