How To Assemble: Chamber Set And Base - nama Vitality 5800 Manual De Instrucciones

11 11

How to Assemble: Chamber Set and Base

* The assembly method is the same regardless of strainer type.
1
The chamber can only be assembled to
the base with the pulp control lever in the
position.
2
Fit the bottom of the chamber to the
base bump.
If the pulp control lever is not placed on
chamber set and base will not t completely.
3
If the sign < > on the top of base and the
sign < > on the chamber set are aligned
well, it is perfectly assembled.
NOTE
The main base will not work by itself, the chamber set
must be on base with safety sensors aligned in order to
operate.
, the