Maintenance; Replacing The All-In-One Hepa Filter And Odor Filter; Part Number - Oreck AIRH1Q Serie Guia Del Usuario

Maintenance

Part
Number

Replacing the All-in-One HEPA Filter and Odor Filter

6
1. Unplug the air purifier.
2. Firmly pull the upper part of the Front Cover to open.
3. Remove the Front Cover.
4. Pull the tabs located on the top portion of the All-in-one
HEPA and Odor Filter to remove. Discard old filter.
5. Remove plastic from filter and insert top of the new All-in-
one HEPA and Odor Filter into the Filter Cavity and then
slide in the bottom.
6. Insert bottom of the Front Cover and rotate it forward. Firmly
push on the upper sections of the Front Cover to snap it in
place.
HEPA filter, 2 pack
8
Part
4
Number
AIRHEPA2PKQ1
2