Troubleshooting - Oreck AIRH1Q Serie Guia Del Usuario

Trouble
Shoot
9
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this guide.
All other servicing should be done by an Oreck authorized
service center.
Problem
Unit does not turn
ON
Unit has high
noise level.
Unit still does not
operate properly.
Check
• Power Cord
• Selector Switch
• Check for dirty
HEPA Filter
• New filter
Check all the above
points.
Solution
• Plug in Power Cord
• Set Selector Switch
for desired blower
speed.
• Replace HEPA filter
if desired.
• Make sure plastic is
removed from new
filter before inserting.
Contact Oreck for
service.
1-800-989-3535