NATURE & DECOUVERTES 42000880 Manual Del Usuario página 32

5
AC
B D
3V +
21
2
19
4 2
16
24. Light Activated LED
Assemble as illustrated. Connect the photosensor to points C and D. Turn on the
16
slide switch . The LED lights up and then goes out. After it goes out, control the
15 17
LED through the photosensor .
16
25. Water Activated LED
Connect the touch plate 12 to points C and D. Turn on the slide switch
17 goes out, put some water on the touch plate 12 . The LED lights up again.
12
26. Sound Activated LED
Connect the buzzer to points A and B. Turn on the slide switch
11
goes out, clap your hands near the buzzer . The LED lights up again.
17 11
11
27. Motor Activated LED
Connect the DC motor 24 to points A and B. Turn on the slide switch
LED goes out, gently turn the motor axle. The LED lights up again.
17
+
24
62
28. Light Activated Lamp
15 . After the LED Assemble as illustrated. Connect the photosensor
slide switch 15 . After the lamp 18 goes out, control the lamp by exposing the photosen-
sor 16 to light.
29. Water Activated Lamp
. After the LED
15
Connect the touch plate to points C and D. Turn on the slide switch
12
lamp goes out, place a drop of water on the touch plate
18
on.
30. Sound Activated Lamp
Connect the buzzer 11 to points A and B. Turn on the slide switch
goes out, clap your hands near the buzzer
15 . After the
31. Motor Activated Lamp
16 to points C and D. Turn on the Connect the DC motor 24
lamp 18 goes out, gently turn the motor axle. The lamp comes back on.
16
AC
. After the
15
. The lamp comes back
12
B
12
21
15 . After the lamp 18
11 . The lamp comes back on.
11
32. The Singing Motor
Replace the 2.5V lamp
points C and D. Turn on the slide switch
63
to points A and B. Turn on the slide switch 15 . After the
+
24
5
D
3V +
2
19
4 2
3
with the DC Motor . Use a 3-snap connector to join
18 24 3
. The motor produces quiet music.
15