NATURE & DECOUVERTES 42000880 Manual Del Usuario página 36

5
23
3V +
19
4
70
60. Light Activated LED
Assemble as illustrated. Use the photosensor to control the LED .
16 17
61. Water Activated LED
Remove the photosensor . Wet your finger and put it on the touch plate
16
the LED 17 .
62. Water Activated Lamp
Remove the photosensor and replace the LED with the lamp . Put water on the
16 17 18
touch plate to control the lamp.
12
18
2.5V
63. Light Activated Lamp
Return the photosensor to its original position and replace the LED
16 17
. Move your hand over the photosensor to control the lamp.
18
64. Manually Activated Light and Sound
Assemble as illustrated. Turn on the slide switch
flashes, and some weapon sounds are produced. Close the button switch
LED glows, the lamp flashes, and the weapon sounds are produced. Use both switches
together to make various sounds.
65. Magnetically Activated Light and Sound
to control Replace the slide switch with the reed relay
12 15
ton switch respectively to control the light and sound. Use the reed switch
14
the button switch together to make various sounds.
14
13
66. Light Activated Light and Sound
Replace the slide switch 15 with the photosensor
button switch 14 respectively to control the light and sound. Use the photosensor
and the button switch together to make various sounds.
with the lamp
16
and the LED glows, the lamp
15 17 18
and the
14
23
. Use the reed switch and the but-
13 13
and
13
67. Water Activated Light and Sound
16 . Use the photosensor 16 and the Replace the button switch 14
16 your finger and put it on the touch plate
switch 15 and the touch plate
71
6
3V +
2
19
3 2
with the touch plate 12 . Close the slide switch 15 or wet
12 to control the light and sound. Use the slide
12 together to make various sounds.
12